Join our mailing list!


Enter your email address:





  Home > POLISHING COMPOUNDS >

  MK TILE GLEAM
  MK TILE GLEAM
 
A natural non-wax compound for the polishing, protection and restoration of most ceramic, porcelain and quarry tiles. Gives a long lasting shine, protects and provides a slip resistant finish to ceramic tiles.

Material Safety Data Sheets (MSDS)


Item# Item Name Price Qty Add
MKTG25W 4 - MK TILE GLEAM 25lbs WHITE $327.75
MKTG25G 5 - MK TILE GLEAM 25lbs GRAY $362.50
MKTG25B 6 - MK TILE GLEAM 25lbs BLACK $387.50
MKTG50B MK TILE GLEAM 50lbs BLACK $598.25
MKTG50G MK TILE GLEAM 50lbs GRAY $575.50
MKTG50W MK TILE GLEAM 50lbs WHITE $525.00
MKTG5B MK TILE GLEAM 5lbs BLACK $91.25
MKTG5G MK TILE GLEAM 5lbs GRAY $87.95
MKTG5W MK TILE GLEAM 5lbs WHITE $84.60
Check the items you wish to purchase, then click


Directions:

MK TILE GLEAM™

MK Tile Gleam™ is a natural non-wax compound for the polishing, protection, and restoration of most Ceramic, Porcelain, and Quarry Tiles. MK Tile Gleam™ gives a long lasting shine, protects and provides a slip resistant finish to ceramic tiles. It does not yellow. Regular use of MK Tile Gleam™ eliminates the need for waxing and stripping.

TO APPLY MK TILE GLEAM™ YOU NEED:

  1. MK Tile Gleam™.
  2. Floor Buffer (175-350 RPM). Water tank and splash guard are optional. Note: Heavier buffer will give you a quicker and better polish.
  3. One natural hair pad, one white buffing pad.
  4. Wet vacuum, clean mop, bucket wringer, and floor squeegee.

DIRECTIONS:

Note: If tile and baseboards have wax or sealer to be removed, use MK Strip Klean™ to effectively strip wax or sealer from the tile surface prior to use of MK Tile Gleam™. If the floor is very dirty or old, you should thoroughly clean and hone the tile with MK Tile Klean™.

  1. 1. Cover baseboards, carpet, etc. with protective plastic and/or tape.
  2. If grout is very dirty, scrub the grout and tile with MK Tile & Grout Klean™ using a scrub brush. Wet vacuum and rinse.
  3. Wet a 25 sq. ft. area of the tile. Sprinkle approx 5oz. of MK Tile Gleam™ on the wet area.
  4. Buff the MK Tile Gleam™ slurry with a natural hair pad for about 20 minutes per 25 sq. ft. area.
  5. Check the level of gloss with the squeegee. When the desired level of gloss is achieved, squeegee the MK Tile Gleam™ slurry to an adjacent area and repeat the process. Add MK Tile Gleam™ and water as needed.
  6. Vacuum dry the MK Tile Gleam™ mixture. Wet the polished area again and buff with the same pad without adding more MK Tile Gleam™ to reduce residue.
  7. Vacuum dry thoroughly, then damp mop with MK Neutral Klean™ and let dry.
  8. Buff polished area with a dry white pad.
  9. Seal grout joints with MK Penetrating Sealer™ for water and stain protection.

CAUTION: The use of gloves and protective clothing is recommended when using MK Tile Gleam™.

COVERAGE: Up to 150 sq. ft. per lb.

Marble Kare Products, Inc. will not be liable for any damage ensuing to property or injury to operator or other person due to the misuse or misapplication of MK Tile Gleam™ or any other chemical sold by them. Store in a dry place. For further technical specification, see Material Safety Data Sheet.




 Share your knowledge of this product with other customers... Be the first to write a review

 Browse for more products in the same category as this item:

POLISHING COMPOUNDS


MK SUPER-FLEXIBLE RESIN BOND HAND 5" POLISHING DISC
MK SUPER-FLEXIBLE RESIN BOND HAND 4" POLISHING DISC
MK SUPER-FLEXIBLE RESIN BOND FLOOR POLISHING DISCS 3"
MK RESIN BOND HAND POLISHING 5" DISC
MK RESIN BOND FLOOR POLISHING 3" DISC
MK PENETRATING SEALER PLUS
MK NEUTRAL KLEAN 128 FL.OZ. (1 Gallon) 3.78 L $20.75
MK MOLD & MILDEW KLEAN
MK MARBLE POLISH $69.95